Function Control - Pilz PKB-M Bedienungsanleitung

www.dplusa.fr
Version
Version
Ver. No.
Version number
XXXXX
XXXXX Version number (hardware and software status)
XXXXYYYY
Version
ZZZZZZZZ
XXXX
YYYY
ZZZZZZZZ ext. BC: Unit with external brake contactor
PKBM Typ
Type
XXXXXXXX
XXXXXXXX Standard: standard version
curr.No.
Production number
XXXXXXXX
XXXXXXXX serial number
Ign.-Pt.
Firing time point
o XXXXX#
XXXXX

Function control

After setting the braking time and the braking current, a test process is
carried out.
If you have selected brake until standstill, repeat the test several times
with a cold and warm motor.
• Check the switch-on current when the brake contactor energises (see
• Check the sequence on the LCD display (see process display).
PKB-M, PKB-MS Operating Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
240V: 240 VAC unit
415V: 415 VAC unit
460V: 460 VAC unit
550V: 550 VAC unit
600V: 600 VAC unit
/15A: 15 A unit
/30A: 30 A unit
int. BC: Unit with internal brake contactor
Aut.Stop: version with automatic standstill detection
Current firing time point of the thyristor control
E-PWR: Voltage at terminals L1 and L2 is missing.
peak current display).
17