DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Downloaded from
www.Manualslib.com
Version
Version number
XXXXX Version number (hardware and software status)
Version
XXXX
240V: 240 VAC unit
415V: 415 VAC unit
460V: 460 VAC unit
550V: 550 VAC unit
600V: 600 VAC unit
YYYY
/15A: 15 A unit
/30A: 30 A unit
ZZZZZZZZ ext. BC: Unit with external brake contactor
int. BC: Unit with internal brake contactor
Type
XXXXXXXX Standard: standard version
Aut.Stop: version with automatic standstill detection
Production number
XXXXXXXX serial number
Firing time point
XXXXX
Current firing time point of the thyristor control
E-PWR: Voltage at terminals L1 and L2 is missing.
After setting the braking time and the braking current, a test process is
carried out.
If you have selected brake until standstill, repeat the test several times
with a cold and warm motor.
• Check the switch-on current when the brake contactor energises (see
peak current display).
• Check the sequence on the LCD display (see process display).