Caller Number Display (Clip Function); Calls List; Dialling Phone Numbers From The Calls List; Menu Options - switel DCT 527 Bedienungsanleitung

6

Caller Number Display (CLIP Function)

If this function is provided by your telephone service, the number of the caller
appears in the display when the telephone rings. If this phone number is
stored in the phone book, the name entered in the phone book appears in
addition to the phone number. If a caller has suppressed transmission of their
phone number, the message Withheld appears in the display. The phone
number is not displayed and, as a result, is not stored in the calls list.
Caution: The caller number display function is an optional service
offered by telephone network providers. Contact your network pro
vider for further information.
6.1

Calls list

Up to 40 phone numbers can be stored in the calls list. This relates to calls
received during your absence. As soon as the calls list is full, the oldest
phone number is deleted when a new one is received.
6.2

Dialling phone numbers from the calls list

Å
The icon appears in the display if calls have been received. Press the ,
button to open the calls list in Standby mode.
Press the , or + button to select the required entry and then press ‡.
The phone number is dialled.
6.3

Menu options

When the calls list is open and an entry has been selected, the following
options are available after pressing the Option button:
Delete Call The entry is cleared from the calls list.
Save Number The phone number is saved in the phone
book.
Note: If the phone number is already stored in the phone book, the option is
not displayed.
Delete All All entries in the calls list are cleared.
- Caller Number Display (CLIP) / Private Branch Exchanges -
7

Private Branch Exchanges / Supplementary Services

The R button on the handset is used in private branch exchanges and for
taking advantage of supplementary services offered by your telephone
network provider.
7.1

R button on private branch exchanges

If the telephone is connected to a private branch exchange, all the functions
associated with the R button, such as transferring calls, automatic call
back, etc., can be used. When used on a private branch exchange, a Flash
time of 100 ms must be set. The dealer where you purchased the exchange
can provide information as to whether the telephone will work properly with
the exchange.
7.2 R button and supplementary services offered by your telephone
network provider
Your SWITEL telephone supports the most important supplementary services
offered by your telephone network provider (e.g. brokering, call waiting,
three-way conferencing, etc.). To use the supplementary services offered by
your telephone network provider, set the Flash time to 120 ms. Please
contact your telephone network provider with regard to enabling the
supplementary services.
7.3

Entering a dialling pause

In the case of private branch exchanges, it is necessary to dial a specific
number (e.g. 9" or 0") in order to obtain the dialling tone for an outside line.
When using some older private branch exchanges, it takes a little time before
the dialling tone becomes audible. Particularly in the case of such private
branch exchanges, it is possible to insert an automatic pause after the
number for the outside line so that the number can be dialled in a continuous
process without having to wait for the dialling tone.
Enter a dialling pause between the number dialled to get an outside line and
the actual phone number to be dialled.
0 Press the button for three seconds
P appears in the display. After dialling the number for the outside line, the
telephone then waits a defined time before dialling the actual phone number.
Note: The pause can also be entered with the phone number in the phone
book.
103