Emptying The Vacuuming Material Container; Maintenance And Care; Changing/ Replacing Filter - Kärcher IV 60/24-2 Betriebsanleitung

terial container").
– Place the appliance in a dry room and
secure it from unauthorized use.
Emptying the vacuuming material
container
To avoid too much filling of the vacuuming
material container, you need to check it reg-
ularly depending on the type and volume of
the sucked in material.
Switch off the appliance and secure it us-
ing the parking brake at the guide roller.
Open the vacuuming material container
upward at the lock (see figure).
Pull out the vacuuming material contain-
er from the appliance using the handle
that has been provided for the purpose.
Note
The vacuuming material container needs to
be emptied if it is full until about 3 cm below
the upper rim.
Empty the vacuuming material container
and insert it back into the appliance us-
ing the reverse sequence.
12 English

Maintenance and care

Warning
First remove the mains plug before doing
any job on the vacuum cleaner.
Warning
Safety devices which are designed to pre-
vent dangerous situations must be serviced
regularly. This means that the safety func-
tions of the devices must be subjected to a
thorough inspection, e.g. checking for leaks
and damage to the filter, and testing the
monitoring function. This must be carried out
by the manufacturer or a trained person at
least once a year.
No outside help is required for carrying out
basic maintenance and cleaning.
The outer surface of the device and the in-
side of the container should be cleaned reg-
ularly using a damp cloth.

Changing/ replacing filter

Switch off the appliance using the ON/
OFF switch and separate it from the
mains.
1 Handle for filter cleaning
2 Spring
3 Fastener for filter dedusting
4 Suction head cap
Tilt the fastener for filter dedusting to-
wards the side.
Unscrew the handle for filter shake-off.
Remove the spring.
Unscrew the nut below the spring (you