Storch 140 HOT Bedienungsanleitung Seite 102

Indication lights
Original instruction
Cause
> Flashing light
- Motor is overheated
> Flashing light
- Faulty temperature
sensor (B1)
> Flashing light
- Flow sensor fault
> Flashing light
- Overheat error has
occurred
> Visual test of lamps
- When switching on, all
LEDs light up for appro-
ximately 1 second
102
Remedy
> Turn main switch to
position "OFF" - let the
machine cool down
Remove/disconnect
extension cable
Possible phase failure on
3 phase variants1): have
electrical connection
checked
> Contact STORCH Ser-
vice
> Cold water operation is
possible
> Check wire to tempera-
ture sensor (B1)
> Contact STORCH Ser-
vice
> Cold water operation is
possible
> Contact STORCH Ser-
vice
> Cold water operation is
possible
> Contact STORCH Ser-
vice