Operating Elements - Endress+Hauser EngyCal RH33 Handbuch

Operation

5.2.1 Operating elements

3 keys, "-", "+", "E".
Esc/back function: press "-" and "+" simultaneously.
Enter/confirm entry: press "E"
5.2.2 Display
Fig. 20: Display of the BTU meter (example)
1: Display Group 1
2: Display Group 2, Maintenance required, Setup locked, Upper flow limit violated
!
Note!
For a list of the display symbols, refer to the Appendix of the Operating Instructions on
CD-ROM.
5.2.3 "FieldCare Device Setup" operating software
For configuring the device using the FieldCare Device Setup software, connect the device to
your computer's USB interface.
Establishing a connection
Proceed as follows:
1. Start FieldCare.
2. Connect the device to the computer via USB.
3. Generate project via File/New.
4. Select communication DTM (CDI Communication USB).
5. Add EngyCal
6. Click "Establish connection".
7. Start online configuration.
28
®
RH33 or RS33.
EngyCal® RH33
a0013462
Endress+Hauser