Cocraft HA 230-S Original Bedienungsanleitung Seite 9

Vibration
• The measurement of the vibration emission level declared in this instruction manual
has been carried out in accordance with a standardised test method described in
EN 60745 and can be used for comparing one power tool with another.
• The measurement method may also be used for a preliminary assessment of
vibration exposure.
• The declared vibration emission level applies when the power tool is used in
accordance with this instruction manual. If however, the power tool is used for
other purposes and with other accessories or has not been properly maintained,
the vibration emission level could increase significantly over the total working period.
• For an exact assessment of the vibration exposure, the times when the tool is
switched off or running idle should also be taken into account. This significantly
reduces the vibration exposure over the total working period. Decide upon safety
measures to protect the operator from the effects of vibration during all types of use.
Safety symbols
Please read the entire instruction manual before use and then save
it for future reference.
Wear safety glass/visor, ear defenders and respiratory protection.
9