Herunterladen Inhalt Inhalt Diese Seite drucken

Cocraft HA 230-S Original Bedienungsanleitung Seite 7

Winkelschleifer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Hold the power tool firmly and position your arms and body so that you can resist
kickback forces. Always use the auxiliary (side) handle if there is one for maximum
control during kickback and to be able to control the torque "kick" produced by
turning the angle grinder on. Kickbacks or reactions to torque can be controlled by
the user if the required safety precautions are followed.
Never place your hand near the rotating accessory. The accessory can be thrown
back onto your hand.
Do not stand in the area, where the power tool is likely to end up if a kickback
were to occur. Kickback will propel the tool in the opposite direction of the grinding
wheel's rotation at the point of snagging.
Use extra care when you are working with corners, sharp edges, etc. Avoid
bouncing and getting the accessory stuck. Corners, sharp edges, and bouncing
have a tendency to get the rotating accessory stuck and lead to loss of control of
the tool.
Never attach a saw chain for wood carving or a toothed saw blade. Such blades
frequently lead to kickbacks and loss of control.
Specific safety precautions for grinding and cutting with
a cut-off wheel
Only use wheel types which are recommended for your power tool and the specific
guard plate intended for the selected wheel. Wheels which are not designed for
use with the power tool cannot be properly guarded and can be dangerous.
The shatter guard must be fitted to the power tool correctly and adjusted to
provide maximum safety so that the user is exposed to as little of the wheel as
possible. The shatter guard helps to protect the user from shards of shattered
wheel and unintentional contact with the wheel.
The wheels must only be used for the recommended applications. For example:
Do not grind with the side of a cut-off wheel. Cut-off wheels are intended for
cutting using the edge. If force is exerted on the face, they can break.
Always use undamaged flanges of a correct size and shape for the wheel you have
selected. Correct flanges support the wheel and minimize the risk of it breaking.
Flanges for cut-off wheels can be different from those which are used for grinding
wheels.
Never use worn-down wheels from larger power tools. Wheels intended for larger
power tools do not have the same speed rating as those intended for use with
smaller tools and can shatter.
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

S1m-td3-230e

Inhaltsverzeichnis