Standard Legrests - Handicare SEDEO Bedienungsanleitung

3.8

Standard legrests

Lower leg length (fig 13)
1. Loosen the setscrew (A) a few
turns with a 4 mm Allen key.
2. Slide the footplate (B) in the
desired position.
3. Tighten the setscrew (A) securely.
Make sure that there is sufficient
free space under the footplates to
operate the wheelchair over
obstacles.
Legrest width (fig 14)
1. Remove the calfstrap.
2. Loosen the setscrews (C) a few
turns with a 4 mm Allen key.
3. Place the legrests (D) in the
desired position.
4. Tighten the setscrews (C) securely.
Legrest depth (option) (fig 15)
1. Loosen the Allen bolt (A) a few
turns with a 5 mm Allen key.
2. Slide the legrest bracket (B) in the
desired position.
3. Tighten the Allen bolt (A) securely.

Make sure that the castor wheels
do not touch the footplates when
manoeuvring. If this is the case,
the legrests must be brought
forward. There must be at least 1
cm between the castor wheels
and the footplates.

Make sure the suspension
bracket does not push into the
back of the knees causing
discomfort. If this is the case,
the seat must be adjusted
forward.
Adjustment options (for qualified specialist)
Figure 13
Figure 14
Figure 15
27