Central Legrest Gas Spring Adjustment - Handicare SEDEO Bedienungsanleitung

Adjustment options (for qualified specialist)
Knee angle (fig 10)
1. Using Allen key 5, loosen Allen bolt
(A) to such an extent that the hinge
teething is released, allowing the
leg rest to be fully adjusted. Hold
the cap nut (B) in place using ring
spanner 13 while doing this.
2. Adjust the leg rest to the right angle
(C) and push the hinge back into
place by hand.
3. Tighten the Allen bolt securely.
3.7 Central legrest gas spring
adjustment
Lower leg length (fig 11)
1. Loosen the knob (B).
2. Slide the footplate (A) in the
desired position.
3. Tighten the knob (B) securely.
Make sure that there is sufficient
free space under the footplate to
operate the wheelchair over
obstacles.
Legrest depth (fig 12)
1. Loosen the Allen bolt (A) a few
turns with a 5 mm Allen key.
2. Slide the legrest in the desired
position.
3. Tighten the Allen bolt (A) securely.
26
B
C
Figure 10
Figure 11
Figure 12
A
010505030