Displaying And Marking Saved Results; Printing And Transferring Results - Mettler Toledo Refracto 30P Bedienungsanleitung

The symbol does not appear in the display: Saving selected results manually
After the measurements, the result appears in reverse display.
Save the result:
- Press the ok/measure key.
Do not save the result:
- Press the esc key.
Ready appears on the display and the instrument is ready for the next measure-
ment.
6.6

Displaying and marking saved results

Displaying saved results
- Press the key.
The sample number flashes and the symbol
- Scroll through the saved results using the
Marking results
For the identification of invalid or incorrect results or for marking a sample change.
- Select the desired sample number using the
- Press the ok/measure key.
The selected sample number is marked with an asterisk.
Note
The marking is removed if the sample has already been marked.
6.7

Printing and transferring results

Conditions
• The interface and peripheral device are configured properly, see Chapter 5.5
and Chapter 8.
• For PRN and RS interfaces, the infrared adapter must be connected to the
printer/PC.
The procedure for printing and transferring results is dependent upon the settings
in the menu (see Chapter 5.4).
Important
To transfer or print results, hold the instrument in the direction of the infrared
adapter at a maximum distance of approx. 20 cm.
The symbol appears in the display: Printing or transferring results
automatically
Every displayed result is transferred automatically.
The symbol does not appear in the display: Printing or transferring selected
results manually
- Press the key.
- Select desired result with the
- Press the ok/measure key to transfer/print the result.
The symbol flashes and the result is transferred.
METTLER TOLEDO Refracto 30P
appears.
and
and
or key.
Measurement (measure)
keys.
keys.
13