Programming Magic Safe; Software Functions - Waeco MAGIC SAFE MS-620 Montage- Und Bedienungsanleitung

Programming MAGIC SAFE

10 Programming MAGIC SAFE
Caution!
Do not enable the acoustic function confirmation (alarm siren acknowl-
edgement tone).If you enable the acoustic function confirmation, the alarm
system will no longer conform to regulation 95/56/EC, and continued oper-
ation is therefore prohibited.
10.1

Software functions

MAGIC SAFE has various software functions which you can alter in accordance with
the following table.
No. Software function
1 Self-activation
2 Locking/unlocking with ignition
3 Convenience function
4 Signal duration of the door locking func-
tion
5 Reactivation
6 Locking on reactivation
7 Alarm duration
8 Interior lighting delay
9 Programmable additional input
10 Alarm siren acknowledgement tone
11 Altering the PIN code
12 Deleting the programmed remote control
The most recently used remote control
remains operational.
13 Reset to ex-plant function
76
Plant setting Value 1
Off
Off
1
(see table in "Using conven-
ience functions" chapter on
0.5 s
On
On
30 s
Off
Engine bonnet Engine bonnet Early warning
Off
1
– Press both simultaneously
– Press both simultaneously
MAGIC SAFE
Value 2
On Off
On Off
1–5
page 77)
0.5 s 4 s
On Off
On Off
30 s 60 s
On Off
On Off
1–9