Status Displays - Waeco MAGIC SAFE MS-620 Montage- Und Bedienungsanleitung

MAGIC SAFE
The programmable input can be connected to the bonnet contact switch, the boot
contact switch or additional door contacts. This additional input can be programmed
so that it does not trigger the complete alarm rather a short pre-alarm.
When MAGIC SAFE is activated, it closes the central locking (if present), when it is
deactivated, MAGIC SAFE opens it again. MAGIC SAFE signals this with a optical
signal via the vehicle indicators, an acoustic signal via the siren and also switches a
status LED on or off as a further indication.
MAGIC SAFE is operated with a two-button remote control. If the batteries are empty
or the remote control is lost or damaged, you can turn the alarm system off with your
PIN code.
You can program new or additional remote control systems to the alarm system.
In addition to this you can alter the software functions of the remote control.
To ensure that a potential thief cannot read the deactivation code, the code transmit-
ted by the remote control is generated anew using a random generation process after
every activation.
5.2 Possible operating modes of MAGIC SAFE
The alarm system has the following three operating modes:
Stand-by
The alarm system is constantly on stand-by as soon as it is installed and cor-
rectly connected. It cannot trigger the alarm when in stand-by.
Activated
If the alarm system is activated, it can trigger the alarm. This happens if some-
one breaks into the door or if the vehicle is rocked, for example. If you wish to
drive off, you must first deactivate the alarm system. The system is then in stand-
by mode.
Alarm triggered
If the alarm is triggered, you can switch off the alarm and then either leave the
alarm activated (activated mode) or deactivate it. The system is then in the
stand-by mode.
5.3

Status displays

The status LED displays have the following meanings:
Condition
Activated
Deactivated
Being activated/alarm
Service mode
PIN code alteration
Status LED display
Slow flashing
Off
Quick flashing
Constant glow
Flashing
Technical description
53