Technical Description; Functional Description - Waeco MAGIC SAFE MS-620 Montage- Und Bedienungsanleitung

Technical description

5 Technical description
5.1

Functional description

MAGIC SAFE MS-620 is an alarm system which is equipped with a shock sensor and
an alarm siren. MAGIC SAFE offers many useful functions, some of which you may
have to adapt to a system which is already installed in the vehicles.
MAGIC SAFE MS-620 offers the following functions:
Integration in a central-locking system already installed in the vehicle
The alarm system can operate an existing central-locking system.
Programmable output for convenience functions.
This enables you to use the remote control to close the sun roof and electrically
operated windows, switch on the parking heater or main beam or to unlock the
boot or petrol tank lid.
Programmable input for connecting a contact switch to the engine bonnet, the
boot or additional door contacts.
Automatic reactivation
If you switch off the alarm and do not open a door or cover panel within 30 s, the
alarm system activates itself again automatically.
Self-activation
If you leave the car and do not open a door or panel within 30 s, the alarm sys-
tem can activate itself automatically.
Service mode for inspections and repairs
In service mode, all settings for the alarm system remain stored, even if the bat-
tery is disconnected.
Panic mode
You can trigger the alarm via remote control, if you are attacked – to scare off
the attacker.
Vehicle search function
You can use the alarm system to indicate the location of your vehicle optically
and acoustically. The alarm siren sounds and the hazard lights flash.
Some functions have been installed as options and have to be configured or pro-
grammed during installation.
The microprocessor-controlled MAGIC SAFE alarm system protects vehicles and
their contents from theft. If the alarm system is activated, an alarm is triggered as
soon as the door, boot or bonnet are opened, the ignition turned on or the shock sen-
sor detects impacts or blows to the vehicle.
An ultrasonic module with sensors can be installed instead of the shock sensor for
monitoring the interior of the vehicle. The device is available as an accessory.
The alarm system has been designed for vehicles with an on-board voltage of 12 V.
The input for the door contact switch can be used for both positively and negatively
charged door contacts.
52
MAGIC SAFE