Danfoss VLT Micro FC 51 Kurzanleitung

Quick Guide for VLT Micro FC 51
1. Quick Guide
1.1.1. Available Literature
NB!
This quick guide contains the basic information necessary for installing and running the drive.
If more information is needed, the literature below can be downloaded from http: //www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/
Technical+Documentation.htm
VLT Micro Drive FC 51 Operating Instructions
VLT Micro Drive FC 51 Quick Guide
VLT Micro Drive FC 51 Programming Guide
FC 51 LCP Mounting Instruction
FC 51 De-coupling Plate Mounting Instruction
FC 51 Remote Mounting Kit Mounting Instruction
FC 51 DIN Rail Kit Mounting Instruction
FC 51 IP21 Kit Mounting Instruction
FC 51 Nema1 Kit Mounting Instruction
X = Revision Number
Y = Language code
1.1.2. High Voltage Warning
The voltage of the frequency converter is dangerous whenever it is connected to mains. Incorrect installation of the motor or frequency
converter may cause damage to the equipment, serious injury or death. Consequently, it is essential to comply with the instructions
in this manual as well as local and national rules and safety regulations.
1.1.3. Safety Instructions
• Make sure the frequency converter is properly connected to earth.
• Do not remove mains connections, motor connections or other power connections while the frequency converter is connected to power.
• Protect users against supply voltage.
• Protect the motor against overloading according to national and local regulations.
• The earth leakage current exceeds 3.5 mA.
• The [OFF] key is not a safety switch. It does not disconnect the frequency converter from mains.
1.1.4. Approvals
Title
®
MG.02.B4.83 - VLT is a registered Danfoss trademark
1. Quick Guide
1
Literature no.
MG.02.AX.YY
MG.02.BX.YY
MG.02.CX.YY
MI.02.AX.YY
MI.02.BX.YY
MI.02.CX.YY
MI.02.DX.YY
MI.02.EX.YY
MI.02.FX.YY
1