General Safety Instructions For Power Tools; Work Area Safety; Electrical Safety - FLORABEST FAH 18 A Originalbetriebsanleitung

Symbols on the battery
Do not subject the battery to
strong sunlight over long periods
and do not leave it on a heater
max. 60°C
(max. 60°C).
Take batteries to an old battery
collection point where they will be
recycled in an environmentally
friendly manner.
Symbols on the recharger
WARNING!
Before using for the first time, care-
fully read through the user manual
The recharger is for indoor use
only.
Protective temperature limiter
130°C
Protection class II
Electrical appliances must not
be disposed of with the domestic
waste.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Do not dispose of
batteries in house-
hold waste, fire or
water.
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated pow-
er tools (with power cord) and to battery-
operated power tools (without power cord).

1) WORK AREA SAFETY

• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2) ELECTRICAL SAFETY

• Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
• Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts. Damaged or entangled cords in-
GB IE CY
5