General Safety Instructions For Power Tools; Work Area Safety - FLORABEST FGS 3.6 A1 Originalbetriebsanleitung

Remember that the cutting equip-
ment will continue to move after
switching the unit off.
Do not use the unit during rain, bad
weather damp surroundings or on
wet grass or hedges.
Danger due to materials blown out
of machine!
Remove persons in the vicinity from
the danger area.
L
WA
Guaranteed sound power level
dB
Protection class III
III
Cutting length Shrub shear blade
Do not dispose of the device
with the battery installed in
household waste.
Symbols on the recharger
Read the manual.
Pole orientation
The recharger is for indoor use
only.
Protection class II
Machines do not belong with do-
mestic waste.
Disconnect the power plug from
the socket when the power cable is
damaged or entangled and before
maintenance and repair work.
Symbols in the manual
Warning symbols (instead of
the exclamation mark, the
danger may be explained)
with information on damage
and injury prevention.
Instruction symbols (the instruction
may be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety direc-
tions and instructions. Omissions
in the compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).

1) WORK AREA SAFETY

a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
GB
7