Appendix Software Agreement - Siemens SIMATIC NET CP 1512 Installationsanleitung

General Licence Conditions for Software Pro-
ducts for Automation and Drives
1. One Off Licence
1.1 The Customer is supplied with the software products detailed in the Confirmation of Or-
der/Software Product List (hereinafter referred to as "Software") on the data medium
indicated therein. The Documentation relating to the Software must be purchased sepa-
rately, unless the Confirmation of Order states that it shall be supplied together with the
Software.
1.2 The Customer is granted the non-exclusive right to use the Software for an unlimited
period of time on the Hardware indicated in the Confirmation of Order, although each
Software supplied to the Customer and - if the Customer has been granted a Copy Licen-
ce - each copy made by the Customer shall only be used on one item of Hardware at one
time. Provided that the Customer is not merely granted a production or run time licence,
he shall be entitled to use the Software for a limited time on the appropriate hardware in
order to generate a custom application.
1.3 Unless expressly prohibited on the data medium, the Customer shall be entitled to make
up to three (3) copies of each item of Software, which shall be used exclusively for back-
up purposes. Otherwise, the Customer shall not be entitled to make copies of the Soft-
ware unless Siemens has previously granted him a Copy Licence in writing.
1.4 The Customer shall not be entitled to modify, redevelop or translate the Software, nor
may he extract individual parts. Furthermore, the Customer shall not be entitled to remo-
ve alphanumeric identifiers, trademarks or details of copyright from the date medium and,
insofar as he is entitled to make copies of the Software, shall copy these details without
alteration. The aforementioned regulation applies equally to the Documentation supplied
in accordance with Clause 1.1.
1.5 The Customer shall be entitled to transfer the right to use the Software granted to him in
accordance with Clause 1 to a third party, provided he makes a written agreement with
the grantee in conformance with all the conditions contained in this Clause. The Custo-
mer shall, however, only grant to third parties the right to use the Software in conjunction
with the Hardware specified in Clause 1.2 for which he has been granted the right to use.
The Customer is aware that - e. g. by virtue of its nature or application - the Software
including the Documentation relating to it may be subject to an export approval in accor-
dance with the German Foreign Trade and Payments Law (see also note on bill of
delivery or invoice). The Customer shall assume responsibility for obtaining the necessary
export approvals and shall make delivery only in accordance with the stipulations of such
approval.
2. Copy Licence
2.1 If Siemens has granted the Customer a copy licence to a Software, the Customer shall
receive a written confirmation of the number of copies he is entitled to make of the data
medium supplied with One Off Licence, which represents the precondition for the Copy
Licence. The Customer is granted for an unlimited period of time the non-exclusive and
non-transferable right to make the number of copies specified in the Confirmation of Or-
der, use the copies in accordance with Clause 1 and grant the right to use these copies to
third parties.
2.2 The Customer shall observe the instructions on copying that are delivered to him together
with the Copy Licence. Furthermore, the Customer shall keep a record of thewhereabouts
of all the copies, which must be open for inspection by Siemens on request.
98
CP 1512 Installation Instructions
CP 1512 Installation Instructions
C79000-N8974-C001-02