Hardware; Installing The Cp 1512 - Siemens SIMATIC NET CP 1512 Installationsanleitung

CP 1512 Installation Instructions
3

Hardware

3.1

Installing the CP 1512

Description
In keeping with the PCMCIA specification, the CP 1512 can be inserted or removed
during operation. It is therefore not necessary to shut down and turn off the PC
before installing or uninstalling the CP 1512.
You can tell the upper side of the CP 1512 by a label with the colored SIMATIC
NET symbol (five pictograms for the various bus systems). The slogan "SIEMENS
SIMATIC NET Networking for Industry" points to the front edge with the 68-pin
connector.
Deactivating the CP 1512
You should, however, deactivate the CP 1512 before removing it from the PC. How
you deactivate a PCMCIA card depends on the operating system you are using.
CP 1512 Installation Instructions
C79000-N8974-C001-02
63