Windows 98 / Windows 98 Second Edition; Installation - Siemens SIMATIC NET CP 1512 Installationsanleitung

CP 1512 Installation Instructions
4.6

Windows 98 / Windows 98 Second Edition

4.6.1

Installation

Requirements
The CP 1512 is installed in the computer.
The computer has booted, the operating system has detected the CP 1512 as a
new card and the wizard for finding new hardware was started automatically. The
dialog of this wizard is displayed on your screen.
Insert the CD supplied with the CP 1512 in your CD drive.
Procedure
Follow the steps outlined below to install the CP 1512 driver under Windows 98.
Step
1
2
3
4
5
6
CP 1512 Installation Instructions
C79000-N8974-C001-02
After starting the computer, the hardware wizard appears automatically.
Click "Next".
Reaction
A dialog box opens in which you can select between searching for the
best driver and displaying a list of drivers.
Select the option "Search for the best driver for your device" and click
on "Next".
Select the option "CD-ROM drive", deactivate all other options and click
on "Next".
Reaction
You will be asked to provide information on the drive.
Click "Next".
Reaction
You may be prompted to insert the Windows 98 CD. In this case,
remove the driver CD and insert the Windows 98 CD. Click on "OK" to
start copying the data.
You return automatically to the hardware wizard.
Click "Finish".
Reaction
You will now be asked whether or not you want to restart.
Confirm with "Yes".
Reaction
As soon as the computer has booted, the installation is completed.
Description
87