Siemens SIMATIC NET CP 1512 Installationsanleitung Seite 93

CP 1512 Installation Instructions
Checking the Installation
Follow the steps below to check whether or not your CP 1512 is installed correctly:
Step
1
2
3
4
CP 1512 Installation Instructions
C79000-N8974-C001-02
Open "Hardware" in the Control Panel (taskbar Start
Control Panel System
Click the "Device Manager" button .
Double-click on the "Network Adapter" entry if this is not already
expanded.
Check whether the CP 1512 has been entered.
• If there is no entry for the CP 1512, the CP was not correctly
installed.
In this case, repeat the installation.
• If the branch of the CP 1512 has an additional icon (yellow triangle
or red dot), double-click on the entry for the CP 1512 to display
further information on possible causes of the problem.
Description
Hardware tab).
Settings
93