Windows Xp; Installation - Siemens SIMATIC NET CP 1512 Installationsanleitung

CP 1512 Installation Instructions
4.2

Windows XP

4.2.1

Installation

Description
The driver of the CP 1512 is normally installed automatically.
If the driver is not found during automatic installation, continue the installation as
described below.
Procedure
The CP 1512 is installed in the computer.
The wizard for finding new hardware started automatically and the dialog is
displayed.
Insert the CD supplied with the CP 1512 in your CD drive.
If you have a SIMATIC NET PC Software CD please use this if it contains a newer
driver than the one on the CD supplied with the CP 1512
(..\cp1512_cp1612\cp1512).
To install the CP 1512 driver manually, follow the steps outlined below:
Step
1
2
3
4
CP 1512 Installation Instructions
C79000-N8974-C001-02
Click the "Next" button.
Reaction
The hardware wizard displays the drivers it has selected for installation.
Click the "Next" button.
Reaction
The next dialog reports the absence of a digital signature.
Click the "Continue setup" button to continue the installation.
Reaction
The final dialog box confirms successful installation of the driver.
Click the "Finish" button.
Description
71