Removing The Cp 1512 - Siemens SIMATIC NET CP 1512 Installationsanleitung

CP 1512 Installation Instructions
3.2

Removing the CP 1512

Deactivating the CP 1512
Before removing the CP 1512, you must deactivate the device in the operating
system. Otherwise the operating system displays a warning.
Instructions on Removing the CP 1512
The cable adapter is locked in position by two catches.
1. These catches must be released before you detach the cable adapter from the
CP 1512. Press in the narrow levers on the left and right of the connector
casing and then pull out the connector from the socket of the CP 1512.
2. The press the ejector button of the PCMCIA slot and remove the CP 1512.
Note
The adapter cable connector to the PCMCIA card is not designed for frequent
removal and insertion. Under no circumstances must the adapter cable be used to
pull out the CP 1512!
CP 1512 Installation Instructions
C79000-N8974-C001-02
1
2
67