Assembly Instruction - SPORTSTECH SX100 Benutzerhandbuch

3. ASSEMBLY INSTRUCTION:

1) Connect the front tube with the frame, and install the plain washer 10, washer 10 to the bolts and put on the
cover-shaped screws. And use open spanner to fasten them. Installation of back tube is the same.
Note: Please adjust the black feet strap to make it balance if it is not stable.
2) The feet straps are marked with L and R. Please drop 2 red screw locking liquid in R strap and fasten it with
right threaded hole by using our spanner. And drop 2 red screw locking liquid in L strap and fasten it with left
threaded hole.
(Note: L and R are marked in crank as well. Please install them accordingly otherwise it will damage
the products. And please fasten the feet strap, or it will fall down after long usage.)
6