Assembly Instruction - SPORTSTECH DFX50 Handbuch

THEY MUST BE TIGHTENED BEFORE USING THE MACHINE!
Step 1
• Attach the two foot-stands to the
main unit by aligning the recesses
and holes in the foot-stands with the
main frame.
• Insert the screws from below through
the stands and screw them onto the
frame with a screwdriver.
Step 2
• Observe the labels R (right) and L
(left). Components with the same
label belong together!
• Turn the right pedal (R) clockwise into
the crank arm (R).
• Turn the left pedal (L) counterclockwi-
se into the crank arm (L)
• Tighten the pedals with the wrench!

ASSEMBLY INSTRUCTION

CHECK ALL BOLTS AND NUTS!
22