Technical Data - Reely Ironbreaker R32 Bedienungsanleitung



13. Technical Data

Engine:
Combustion engine: FORCE R32 with rear exhaust, ABC running equipment, carburettor slide, two-chamber resonance sound absorber
Cubic capacity: 5.24 ccm
Power: 2.21 kW / 3.0 PS (at 30,000 rpm)
Engine speed: 5,500 - 33,000 rpm
Borehole: 20.1 mm
Lift: 16.6 mm
Weight: 419 g
Fuel: RC car model fuel on methanol/oil basis, minimum share of 5% - 25% nitro methane and 16% synthetic oil
Tank capacity: 125 ccm
Lubrication Self-lubricating
Air filter: Dry foam filter, dismountable
Power transmission:
Four wheel drive via cardan shafts to front and rear axles
Enclosed differential in the front and rear axle
All drive axles are mounted with ball bearings
Adjustable 1-gear drives
All differentials with metal bevel gears and planet gears
Centrifugal clutch
Chassis: P-440ST
Aluminium chassis, aluminium shock absorber bridges, aluminium servo saver plate, aluminium steering knuckle,
four reinforcement rods
Undercarriage:
Front wheel suspension: Twin control arm suspension
Clamping screw in the top transverse control arm, camber adjustable
Light-metal die-cast front axle leg:
Rear wheel suspension: Twin control arm suspension
Clamping screw in the top transverse control arm, camber adjustable
Brakes: Disk brakes with aluminium brake disks
Special brake lining on rear axle drive and the front axle drive
Suspension: Spring struts with 4 aluminium oil-dampened shock absorbers and thread-spring pretension
Servo saver: Adjustable
Tyres: Front/rear: Complete disk wheels with multi block tyres, ready to run, width: 89 mm, Ø 161 mm
Electronics:
Remote control: Modelcraft MC-Sport 40 MHz FM
Steering servo: Modelcraft Premium Line 9051
Throttle Servo: Modelcraft Premium Line 4519
Dimensions and weight:
Length: 600 mm
Width: 430 mm
Height: 2,225 mm
Track: 336 / 341mm
Wheel base: 397 mm
Weight: 4,770 g
56