D) Installing The Tail Rotor Servo - Reely SKY Thunder 500 Bedienungsanleitung

d) Installing the Tail Rotor Servo

For best flight results, select a very precise and fast build for your tail rotor servo.
Figures 5a and 5b show the tail rotor servo (1).
Install the servo as shown in the image.
Install the pushrod for the tail rotor linkage (2) to
the servo lever ball head. For this, first install the
ball head to the servo levers.
Shorten the pushrods so that both rods are of ex-
actly the same length and can be installed with-
out any tension with the servo in its neutral posi-
tion.
Figure 5a
Figure 5b
41