Werbung
15. Care and maintenance
Check the rudder linkages and the control functions of the servos on your model regularly. All moving parts have to be
easily movable but there should not be a clearance in the bearing.
Clean the exterior of the model and the remote control only with a soft, dry cloth or brush. Never use aggressive
cleansing agents or chemical solvents, since this might damage the surfaces.
Important!
If you have to replace damaged or worn parts, only use original replacement parts.
Damage to the foam materials should only be carried out with super glue which is suitable for hard
foam. Traditional super glue can dissolve the foam material and damage it severly. Avoid adhesives
that contain solvents.
The spare part list can be found on our website in the Download domain specific to the corresponding product.
You can also order the replacement parts list by phone. For the contact data, please refer to the top of these instructions
in the chapter "Introduction".
62
5. Contenu de la livraison
Avant de procéder au montage, vérifiez le contenu de l'emballage de votre modèle à l'aide de la liste des pièces.
Contenu du kit :
1
Fuselage
2
Arc décoratif
3
Ailes
4
Empennage latéral
5
Empennage horizontal
6
Train d´atterrissage avec éléments de protection et vis
7
Hélice et hélice de rechange
8
Nez d'entrée
9
Tournevis et clé à fourche
10 Vis pour ailes
11
Chargeur à brancher
12 Accu de propulsion
13 Emetteur de la radiocommande
Figure 1
71
Werbung
Kapitel
Fehlerbehebung
