Ups Internal Battery Connection - Eaton 9910-P33 Installationsanleitung

Table 5. EBM Accessory Kit (39J4826)
Quantity Eaton PN
1 164201635
1 152602008

UPS Internal Battery Connection

NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your service
representative.
To ensure proper battery operation before installing the UPS:
1.
2.
3.
NOTE A small amount of arcing may occur when connecting the batteries. This is normal
and does not damage the unit or present any safety concern.
®
EATON Powerware
Description
Powerware 5125 (9910-P33) EBM Installation Guide for IBM Applications
EBM Cable
Verify that the UPS is off and unplugged.
Remove the packing material (see Figure 1).
Figure 1. Removing Packing Material
Connect the internal battery connector (see Figure 2).
5125 (9910-P33) UPS Installation Guide for IBM
INSTALLATION
® S
Applications 164201634 Rev A
3