Serial (Tty) Interface Overview - Eaton 9910-P33 Installationsanleitung

Serial (TTY) Interface Overview

To serially (TTY) connect the UPS to a p5, pSeries, RS/6000
OpenPower or other system you need:
S
An Eaton-supplied serial interface cable (labeled 124102043-001),
located in the P33 accessory kit
S
Powerware LanSafe Power Management Software from the
Software Suite CD, located in the P33 accessory kit
For p5 installations, you also need:
S
An IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed
on a p5 server (the pSeries does not require an EIA adapter)
S
An IBM-supplied maintenance package 5200-05 for AIX 5.2L V5.2
(APAR IY66260); or the maintenance package 5300-01 for AIX 5.3L
V5.3 (APAR IY62267)
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software. Connect the serial
cable as shown in Figure 25.
Serial Interface Cable
(labeled 124102043-001)
Communication Port
®
EATON Powerware 5125 (9910-P33) UPS Installation Guide for IBM
IBM p5 Server
UPS
Figure 25. Serial (TTY) Interface
®
Applications
COMMUNICATION
,
®
2-Port Asynchronous
EIA Adapter
(FC 5723)
S 31
164201634 Rev A