Cleaning Of All Optical Parts; Cleaning Of Ventilation; Oiling Of Rotating Gobos; General Informations On Dmx512 Record - JB-Lighting VARYSCAN 4 COMPACT PLUS 575 HM Bedienungsanleitung

VARYSCAN 4 COMPACT PLUS 575 HMI

1. Cleaning of all Optical Parts

You should clean the optical parts of your Varyscan
having opened the casing as explained above, take out the effect / colour wheel slide-in (see sketch page 4) and
put it on an underlay before you. Take a fuzz-free rag and a detergent for windows and clean the effect / colour
filters.
Subsequently clean both lenses (sketch page 4). In order to clean the lens easily, loosen the screw which fixes the
lens and remove the lens. Now it is easy to clean from the outside and the inside. Put in the lens and the effect
colour wheel slide-in. Do not forget to tighten the screw which fixes the lens and the screws which fixes the slide-
in's

2. Cleaning of Ventilation

You should check the function of ventilators regularly. Above all take care that ventilation inlets and the interior of
®
the Varyscan are free from fuzzes and other dust. Open both lids of your Varyscan
from the lids. Now clean your Varyscan
you use the sheet metal screws for closing the smaller lid.
Attention: Take care that you do not twist or damage any parts while cleaning your scanner!

3 Oiling of Rotating Gobos

Procure a syringe with a thin needle, customary in trade (grind off the tip, so it will be blunt - no risk of injury!!), and
fill it with our special oil. On no account use another kind of oil, because our oil is a special mixture. Now
syringe the oil between the brass gear wheels and the brass plate and turn the rotating gobos by hand.
Attention: Do not use too much oil!

General Informations on DMX512 Record

DMX 512 record is devided in 512 addresses. You have 512 addresses to your disposal. To be able to connect
different appliances with a DMX-controller, it is necessary to determine the number of DMX-channels for every
appliance. The occupation of channels of a scanner could be like that for example:
channel 1
channel 2
channel 3
channel 4
channel 5
channel 6
In order that not every connected DMX-appliance performs same functions, the appliances are addressed in
series; i.e. for the first appliance the first 6 addresses are used (be right for an appliance with six channels), for the
second one (appliance with six channels) the next 6 addresses of all the DMX-addresses are used (see for
®
example Varyscan page 10).

Occupation of Channels for Varyscan

JB lighting 8 channels

Channel 1
Channel 2
Channel 3
®
carefully with a vacuum cleaner. Screw down the lid now. Take care that
x-movement
y-movement
gobo/effect wheel
colour
shutter/dimmer
iris/gobo positioning/gobo rotation
X-movement
Y-movment
gobo
®
periodically to restore maximum brightness of the scan. After
®

4 Compact Plus 575 HMI

30
®
, by screwing off the screws