Definition Of Dip-Switch Positions For Defined Dmx-Addresses - JB-Lighting VARYSCAN 4 COMPACT PLUS 575 HM Bedienungsanleitung

VARYSCAN 4 COMPACT PLUS 575 HMI
3. JB-lighting 6 channel drive mode
channel 1
channel 2
channel 3
channel 4
channel 5
channel 6
DIP-switch position: DIP-switch No.2 switch 2 and 3 on
Reset on DMX
:
DIP-switch No.2 switch 4
If you would like to reset your Varyscan
the possibility to reset your Varyscan
If switch 4 at DIP-switch No.2 is turned off, reset on
DMX is not possible.
Adjustment of DMX-Addresses
Depending on the optional drive mode, you have to adjust DMX-addresses as follows. The addressing works by a
binary numeral system and in 6 channel drive mode it has to follow in six steps.
channel drive mode addresses have to be adjusted in 8 steps.

Definition of DIP-switch positions for defined DMX-addresses

x-motor
y-motor
gobo
colour
dimmer/shutter
iris/gobo rotation
®
from your DMX-desk, turn switch 4 on at DIP-switch No.2. Now you have
®
, if you transmit DMX-factor 255 via gobo channel.
:
DIP-switch No.1 switch 1-9
27
In 8