Service; Lamp Replacement; Cleaning The Fixutre; Cleaning The Optics - JB-Lighting varycolor p3 Bedienungsanleitung

5. Service

5.2 Lamp replacement

see chapter 2.1
5.3 Cleaning the fixture
WARNING: Disconnect fixture from mains, and allow
!
To ensure a long and satisfying performance of the fixture, check function of the
VC P3 fans in the head and in the base from time to time. Most important: make
sure that there is no dust or fluff covering the air inlets.
To clean the fixture open lid of the head and the baseplate. Use a brush and a
vacuum cleaner to remove dust and fluff. Don´t damage or bend any parts.
Incompetend performace of the maintenance will invalidate the warranty claims.
Consult qualified service personnel.

5.4 Cleaning the optics

WARNING: Disconnect fixture from mains, and allow
!
For a maximum light output the optical system has to be cleaned from time to time.
Loosen the screws holding the top cover of the head and remove the plastic lids of
both sides of the head.
Remove lamp before cleaning the optical parts of the fixture.
Use a soft cloth and gently whipe reflector, lenses and colour filters. You also may
use a pair of tweezers and a regular glass cleaner.
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein Telefon +49 (0)7304-9617-0
hot lamp to cool down for at least 30 minutes!
hot lamp to cool down for at least 30 minutes!
31