Interacoustics MT10 Gebrauchsanweisung Seite 24

MT10 Instruction for Use - EN
1. Launch the Database (OtoAccess™ or NOAH)
2. Select the right patient
3. Launch Diagnostic Suite (via OtoAccess™ or NOAH)
4. Select the IMP tab
5. Turn on the MT10
Select "New Test"
6.
7. Select ear (Left/Right/Both)
8. Process results (send to Computer (or save & send))
Press "select" when ready (point at the IR-receiver)
9.
10. Connecting... ("handshake" between MT10 and IR-
receiver)
11. Data transferred to Diagnostic Suite (5 sec.)
(Data/measurements shown in front view)
12. Save the data.
Data Transfer Guide –
After a Measurement
Page 18