Operation; Short Description - Conrad WS-8035IT Bedienungsanleitung

10. Operation

a) Short description
The weather station is equipped with 6 buttons on the front side which, depending on the operating mode, allow the
following functions (you can find a detailed description from chapter 10.b onwards):
"SET" button (Setting)
• Press and hold the button for 3 seconds to activate the setting mode (contrast for the LC display, time zone, time
reception On/Off, 12/24h time display format, manual setting of time, calendar, selection of temperature unit °C/
°F, selection of barometric pressure unit hPa/inHg, relative reference value of barometric pressure, setting
weather icon sensitivity).
• Resetting all minimal and maximal saved values
• Stopping the alarm clock during the alarm signal
• Ending the snooze mode
"ALM/DATE" button (alarm clock/date)
• Press and hold the button for 3 seconds in order to activate the setting mode for the alarm clock.
• Activate/deactivate the alarm time
• Stopping the alarm clock during the alarm signal
• Ending the snooze mode
• Date display
"IN" button
• Briefly press to switch between the displays of the max., min. and current indoor temperature and indoor humidity
• Press to set the wake time (in alarm clock setting mode)
• Decreasing the relative reference value of barometric pressure (in the manual setting mode)
• Stopping the alarm clock during the alarm signal
• Ending the snooze mode
"OUT/+" button
• Briefly press to switch between the displays of the max., min. and current outdoor temperature and outdoor
humidity
• Increasing, modifying, switching all values in the manual setting mode
• Press to set the minutes of the wake time (in alarm clock setting mode)
• Stopping the alarm clock during the alarm signal
• Ending the snooze mode
43