Snooze Function; E) Stopping The Alarm Function/Deactivating The Alarm Tone; Switching The Radio On/Off; Setting The Transmission Frequency - Conrad 67 20 73 Bedienungsanleitung

d) Snooze function
You can interrupt the alarm tone for 10 minutes.
• Press the "SNOOZE/LIGHT" (9) button. During the interruption time, the "ALARM 1" or
"ALARM 2" symbol fl ashes.

e) Stopping the alarm function/deactivating the alarm tone

To stop the alarm tone, press the "ALARM 1" (2) or "ALARM 2" (3) button, whichever wake-up
time is activated. The wake-up time is deactivated at the same time.
If you want to be woken again at the same time by "ALARM 1" or "ALARM 2" the
following day, you need to reactivate the wake-up time.
f) Switching the radio on/off
• To switch the radio on or off, press the "ON/OFF" (10) button.
The alarm time set last will appear in the display.
g) Setting the transmission frequency
The transmission frequency for a radio station can only be set when the radio is switched on.
• Press the "FM/AM/AUX." (11) button until the desired function appears in the display.
• Set the volume using the "Volume" (7) volume controller.
• Press the "UP" (5) or "DOWN" (6) button to set the transmission frequency. If you hold the
"UP" (5) or "DOWN" (6) button down for longer than fi ve seconds, the device will search for
the next transmitter with a strong reception signal.
27