2. Mounting the tonearm base
Mounting the tonearm base on a Clearaudio turntable:
Mount the tonearm base (see picture 2) with the three screws and the hex key wrench (#3)
onto the tonearm mounting platform.
Pic.2: Mounting the tonearm base
Please tighten all three screws as shown in the picture below.
Pic.3: Tighten the three screws of the tonearm
base
Seite / Page 5
TT 2
User manual / Bedienungsanleitung
Tonearmbase
Height adaptor
clearaudio electronic GmbH 2014