Technical Data - Clearaudio TT2 Bedienungsanleitung

6. Technical data

Construction
Drive
Weight
Dimensions (w x h x d) in inch:
Dimensions (w x h x d) in mm:
Warranty:
* Only if the warranty card is filled out correctly and sent back to Clearaudio within 14 days.
Attention:
This tonearm is suitable for cartridges from 7 gr. net weight!
If your cartridge is easier, please use an additional weight (headshell plate).
Clearaudio electronic is not responsible for typographical errors in descriptions. Technical
specifications subject to change or improvement without prior notice. Availability as long as stock
lasts. Copies and imprints- also only in extracts – require written conformation through Clearaudio
electronic GmbH; Germany.
 clearaudio electronic GmbH 2014
Seite / Page 13
Resonance-optimized chassis, patented two-point -
tangential tracking
- Strictly mechanical
- Selected high precision ball bearings running in a
polished glass tube
Approx: 1990 gram without base / base only 235 gram
Approx.: 12 inch x 4 inch x 3 inch
Approx.: 300 mm x 100 mm x 70 mm
5 Years * (see chapter 5 / page 26)
TT 2
User manual / Bedienungsanleitung
Version: April 2014
 clearaudio electronic GmbH 2014