Package Contents; Installation On Unify Round Base - Clearaudio swing base Bedienungsanleitung

User manual / Bedienungsanleitung

1. Package contents

The Clearaudio swing base
Please retain the original packaging for any future potential transportation and shipping.
Please see the list below to check the contents of your Clearaudio
1
Pic. 1: Package contents
swing base
1.
2. Hex wrench
(Size: 1.5 / 2 / 3)

2. Installation on Unify round base

Please install the appropriate tonearm base on your turntable first.
For Ovation and Performance DC turntables you will need the Unify base (Art. No. AC031-4,
available from your dealer).
Ensure that you set the correct distance of 222mm between platter spindle and tonearm pivot.
Pic. 2: Unify tonearm base
Page / Seite 4
is delivered in specially designed packaging to ensure safe transport.
2
Pic. 3a: Mounting of the tonarm base
swing base
3
3. Socket head cap screw
3 pcs. M4x16
4 Not shown:
User manual
© clearaudio electronic GmbH, 2021-04
package.
Pic. 3b: Mounting of the
tonarm base on the
bottom side