Arai RX-7RC Gebrauchsanleitung Seite 24

Left chinstrap cover (D-ring side)
Couvercle gauche de la jugulaire (côté anneau en forme de D)
Linke Kinnriemenabdeckung (D-Ring-Seite)
Right chinstrap cover (long side)
Couvercle droit de la jugulaire (côté long)
Rechte Kinnriemenabdeckung (lange Seite)
22
English
To replace the lining, place the bosses over their
plastic receptacles and push them home.
WARNING:
When reinstalling the comfort lining, be sure
the lining is properly positioned along the inside
shape of the EPS (a.k.a. Styrofoam) liner. If the
comfort lining is not properly installed, the frame
of the comfort lining may fold when you put on
and take off the helmet, which may injure your
skin, etc. Whenever you feel something is wrong
with the comfort lining, check that the lining is
properly installed.
TO REMOVE/REPlACE CHINSTRAP
COVERS
RX-7GP / CORSAIR-V / QUANTUM / RX-Q
To remove the chinstrap covers, first remove the
cheekpads as per previous instructions.
Remove the plastic chinstrap anchor cover from the
steel chinstrap anchor and slide the cover off the
chinstrap.
Note the right and left, inside and outside of the
chinstrap covers for replacement.
To wash the chinstrap covers, put them into
lukewarm water with small amount of laundry
soap or your own shampoo and wash gently by
hand. Rinse well with fresh water and wipe off
with a soft cloth. Dry them in the shade at ambient
temperature.
WARNING:
Never use petrol, thinner, benzene or any other
solvents.