Cocraft LS405 Bedienungsanleitung Seite 3

Log Saw
Art.no 40-8982 Model 65650
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions concerning technical problems please contact our Customer Services.
Safety
General safety instructions for power tool use
Warning: When using this machine all basic safety precautions must be followed to minimise the risk of fire,
electrocution and personal injury. Read these instructions carefully before using the product and keep them for
future reference.
1. Keep the work area tidy.
Cluttered surfaces and benches invite accidents.
2. Take stock of your working environment.
Do not expose the machine to rain. Do not use the machine in moist or wet areas. Keep the working area
well lit. Never operate the machine near flammable liquid or gas.
3. Reduce the risk of electric shocks.
Avoid body contact with earthed objects such as pipes, radiators, ovens or refrigerators.
4. Keep other people at a safe distance.
Do not allow anyone not involved in the work process to touch the machine or its electric cable, especially
children. Keep all bystanders at a distance.
5. Store the machine in a safe place.
When your machines are not in use, keep them in a locked, dry area, away from children.
6. Do not overload the machine.
The tool will work better and safer at the feed rate for which it was intended.
7. Use the correct machine.
Do not try to use small machines to perform jobs requiring more powerful machines. Do not use a machine
for a purpose for which it was not designed, e.g. using a circular saw for lopping branches off trees or cutting
timber.
8. Wear suitable attire.
Do not wear loose-fitting clothing or jewellery; they could be caught in moving parts. Non-slip shoes are
recommended for outdoor work. Wear a hairnet or similar if you have long hair.
9. Always wear safety glasses.
Wear safety glasses. Use a dust mask or dust filter when working in dusty environments.
10. Use dust extractors.
If the machine is equipped with or connected to a dust extractor/collector, make sure that it is turned on and
used correctly.
11. Do not abuse the mains lead.
Do not pull or tug the mains lead when unplugging the machine, grip and pull the plug itself. Make sure that
the mains lead does not come into contact with heat, oil, or sharp edges.
12. Do not overreach.
Make sure that you stand steady and balanced all times.
13. Maintain power tools in top condition.
Make sure that your machine is clean and that any cutting edges are sharp for maximum effect and best
results. Follow the manual's recommendations regarding lubrication and replacement of accessories. Inspect
the mains lead regularly. If it is damaged it should be replaced by a qualified service technician. Inspect all
leads and cables regularly to check for any damage. Make sure that the machine's handles and controls are
clean, dry and free from oil, grease etc.
14. Turn the power off.
Push in the emergency stop button and pull the plug out before servicing or changing any blades, drill bits,
cutters or sanding discs.
15. Remove all spanners and repair tools.
Make a habit of checking to make sure that the machine is free of all spanners and tools before turning
the power on.
3