Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Storage; Disposal; Kompernass Handels Gmbh Warranty - Parkside PMDS 100 B1 Originalbetriebsanleitung

Modellbau-doppelschleifer
Vorschau ausblenden Andere Handbücher für PMDS 100 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance and cleaning

WARNING! RISK OF INJURY!
Disconnect the plug before adjust-
ment, maintenance or repair.
The appliance is maintenance-free.
Always clean the appliance directly after com-
pletion of work.
Pull the grinding dust draw
the appliance and empty it (see fig. D).
Use a dry cloth to clean the housing. Under
no circumstances should you use detergents,
solvents or abrasive cleaners.
Ensure ventilation openings are always free.
Remove any adhering swarf with a brush.

Storage

Store the appliance in a dust-free and dry place.
Store brushes dry and not in the field aggressive
media.
Grinding discs must be stored dry and upright
and are not to be stacked.
Accessories otherwise protected against damage.
Store the appliance out of reach of children.

Disposal

The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal household waste!
In accordance with European Directive
2012/19/EU on Waste Electrical and Electronic
Equipment and its implementation into national law,
used power tools must be collected separately and
recycled in an environmentally friendly manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
GB │ MT
18 
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
laterally out of
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion. This warranty service is depend-
ent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance
with strict quality guidelines and inspected meticu-
lously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not extend to product parts
subject to normal wear and tear or fragile parts such
as switches, batteries, baking moulds or parts made
of glass.
PMDS 100 B1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis