General Power Tool Safety Warnings; Working Safely - Parkside PMDS 100 B1 Originalbetriebsanleitung

WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in such a way may cause the user to underes-
timate the vibration. To estimate the vibration
load during a specific working period accu-
rately, also take into account periods during
which the appliance is switched off (or running,
but not being used). This can significantly re-
duce the vibration load over the total working
period.
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instruc-
tions. Failure to follow the safety instructions
listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

Working safely

■ Keep your workspace tidy.Untidiness in the
work area can cause accidents.
■ Take account of environmental influences.Do
not expose the power tool to rain. Do not use
the power tool in wet or moist environments.
Ensure that your workspace is adequately lit.
Do not use power tools where there is a risk of
explosion or fire.
■ Protect yourself from electric shocks! Avoid
body contact with grounded surfaces (e.g.
pipes, radiators, electric cookers, refrigerators
and freezers).
■ Keep other people at a distance. Do not allow
other people, especially children, to touch the
power tool or the cord. Keep them out of your
work area.
│ GB │ MT
■ 14
■ Store unused power tools safely! Unused
electric tools should be placed in a dry, high-up
or closed-off place out of the reach of children.
■ Do not overload your power tool! You will
work better and more safely in the specified
performance range.
■ Use the right power tool for the job. Do not
use low performance tools for heavy work. Do
not use the power tool for purposes for which
it is not intended. For example, do not use a
circular saw to cut tree branches or logs.
■ Wear suitable clothing! Do not wear loose
clothing or jewellery, which could get caught
in moving parts. Non-slip footwear is recom-
mended when working outdoors. If you have
long hair, wear a hairnet.
■ Use protective equipment! Wear safety
goggles. Use a breathing mask for
work that produces a lot of dust.
■ Connect the dust extraction device! If there
are connections for dust extraction and collec-
tion, make sure that these are connected and
used properly.
■ Do not use the cord for purposes for which
it is not intended! Do not pull on the cord to
unplug the power tool. Protect the cord from hot
surfaces and sharp edges.
PMDS 100 B1