Technical Details - Parkside PMDS 100 B1 Originalbetriebsanleitung

Technical details

Rated voltage:
Rated power
consumption:
Protection class:
Protection type:
Rated idle speed:
Working speed:
Weight (incl. accessories): approx. 1.7 Kg
* After uninterrupted operation for 20 minutes, you
must take a break until the appliance temperature
is within 2 K (2°C) of room temperature.
Grinding discs
Outer diameter:
Drill hole:
Thickness:
Hardness grade:
Grain size:
PMDS 100 B1
230–240 V∼, 50 Hz
(alternating current)
100 W S2:20min*
II / (double insulation)
IP 20
n 3000–9000 rpm
0
8–24 m/s
n 3000–9000 rpm
0
V 8–24 m/s
D Ø max. 50 mm
d Ø 12.7 mm
t 13 mm
Ø 50 mm
Ø 12.7 mm
13 mm
M
100/80
Steel wire brush/brass wire brush
Outer diameter:
Bore:
Thickness:
■ Use only brushes with a max. hole diameter of
10 mm and max. brush thickness of 10 mm.
Noise emission value:
Noise measurement value determined in accord-
ance with EN ISO 4871. The rated noise level of
the tool is typically:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Total vibration value:
Total vibration value as per EN 61029:
Vibration emission value a
Uncertainty K = 1.5 m/s
h
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and can
be used to make equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
D Ø max. 50 mm
d Ø max. 10 mm
t max. 10 mm
Ø 50 mm
Ø 5 mm
8.5 mm
L
= 60.94 dB (A)
pA
K = 3 dB
pA
L = 73.94 dB (A)
WA
K = 3 dB
WA
≤ 2.5 m/s 2
h
2
GB │ MT │
13 ■