Setting The Alarm; Switching The Alarm On / Off - Auriol Z29962C Bedienungsanleitung

Setting the alarm

Q
j
P ress and hold the ALARM button
3 seconds.
note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with aL. Otherwise 0:00 and aL are displayed.
j
P ress the ALARM button
start to flash.
j
P ress the ADJUST button
number.
j
P ress the ALARM button
entry. The minutes start to flash.
j
P ress the ADJUST button
number.
j
P ress the ALARM button,
entry.
j
T he LCD returns to the standard display (Time

Switching the alarm on / off

Q
j
P ress and hold the ALARM button
3 seconds. The set alarm time appears on the LCD.
j
P ress the ADJUST button
on or off.
note: when the alarm is switched on,
displayed above aL.
note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
j
T he alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY
ADJUST
12
switch the alarm signal off within this time.
note: the alarm rings every day at the set time.
13
12
13
12
13
12
, ALARM or CLOCK
13
for approx.
13
briefly. The hours
to set the required
to confirm your
to set the required
to confirm your
9
for approx.
13
to switch the alarm
is
,
11
, to
14
GB/IE
).
17