Inhaltsverzeichnis; Technical Specifications; Safety Instructions - Ferm TSM1033 Originalbetriebsanleitung

TABLE SAW
TSM1033
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 5
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Technical specifications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance

1. TECHNICAL SPECIFICATIONS

Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeth
Max.workpiece height 90º
Max.workpiece height 45º
Thickness of the riving knife
Blade body thickness
Measurements of bench (max)
Weight
Lpa (sound pressure level)
Lwa (sound power level)
6
230-240 V~
50 Hz
1500W (S1) 1800 W (S6 40%)
4700/min
250 x 30 x 2.8 mm
T40
74 mm
63 mm
2.0 mm
1.6-1.9 mm
930 x 625 mm
22.5 kg
94.8 dB(A) K=3dB
107.8 dB(A) K=3dB
Product information
Fig. A
1. Protective cap
2. Parallel guide
3. Table
4. Mitre handle
5. Height handle
6. Ruler for parallel guide
7. On/off switch
8. Thermic safety switch
9. Workbench
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.

2. SAFETY INSTRUCTIONS

Explanation of symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
Keep bystanders away.
Always wear eye protection!
Wear hearing protection.
Class II machine - Double insulation - You
don't need any earthed plug.