Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
TABLE SAW
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 5
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Technical specifications
Product information
Fig. A
1. Protective cap
2. Fence
3. Bench inlay
4. Mitre handle
5. Height handle
6. Measurement set-up for fence
7. On/off switch
8. Thermic safety switch
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts
are present.
6
Technical data
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeth
Max.cutting depth 90º
Max.cutting depth 45º
Measurements of bench
Weight
Lpa (sound pressure level)
Lpa (sound power level)
Vibration level
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029-1; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
-
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level.
-
the times when the tool is switched off or
when it is running but not actually doing the
job, may significantly reduce the exposure
level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
230 V~
50 Hz
1700 W
4800/min
254 x 30 x 2.8 mm
T40
73 mm
60 mm
630 x 445 mm
28.4 kg
96.2 dB(A) K=3dB
109.2 dB(A) K=3dB
< 2.5 m/s
2
Werbung
Inhaltsverzeichnis
