Dmx-Controlled Operation; Dmx-Protocol - EuroLite LED KLS-406 RGB DMX Bedienungsanleitung

When the display shows *SND, the device is in sound controlled mode. To switch to DMX mode, press the
DOWN button.
When the display shows *AUTO, the device is in auto mode. The program runs at a fixed speed, which can
be set under S***.
When the display shows S***, you can choose the desired speed of the internal programs. Default is 51; for
increasing speed press the DOWN button, for decreasing speed press the UP button.

DMX-CONTROLLED OPERATION

You can control the spots individually via your DMX-controller.

DMX-protocol

Channel 1 – Internal Programs, Sound Controlled Mode
Value:
000 – 009
010 – 029
030 – 049
050 – 069
070 – 089
090 – 109
110 – 129
130 – 149
150 – 169
170 – 189
190 – 209
210 – 229
230 – 249
250 – 255
Channel 2 – Master Dimmer (when Channel 3 on, Channel 2 no function)
Value:
000 – 009
010 - 255
Channel 3 – Strobe
Value:
000 – 009 Off
010 - 069 Flash, with increasing speed
070 – 139 Chasing Flash (left-right) with increasing speed
140 - 209 Chasing Flash (right-left) with increasing speed
210 – 253 Random Flash with increasing speed
254 - 255 On
Channel 4 – Spot 1: red
Value:
000 – 255
Channel 5 – Spot 1: green
Value:
000 – 255
Function:
Off
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Sound Controlled Mode
Function:
Off
Dimming from 0 – 100%
Function:
Function:
Dimming from 0 – 100%
Function:
Dimming from 0 – 100%
19/22 00043659.DOC, Version 1.1