Kessel Aqualift-F Anleitung Seite 23

Insert the seals
Depending on the installation depth, the chamber system is
set up with adapters. To do this, proceed as follows:
Keep the seal groove clean. The seals are inserted as shown
in the adjacent illustrations. Please note the two different dia-
meters. Grease the seals shortly before the chamber parts
are fitted together.
Access steps (accessories)
The steps are only in KESSEL chamber system 1000
included in delivery.
4. Installation and assembly
23
Putting the chamber parts together
Set the chamber parts on top of one another. Please make
sure the access steps are arranged correctly. Put the cham-
ber parts together as shown in the above diagram.
Fitting the telescopic attachment piece
Hammer the
seal into place
Grease the lip
seal, insert the
attachment
piece and fix
in place using
a clamping
ring
Fine adjust-
ment can be
carried out
using adjust-
ment screws.