General Description; Extent Of The Delivery; Overview; Function Description - FLORABEST FKS 2200 D2 Betriebsanleitung

The device is designed for use by adults.
Young people over 16 years old may use
the chainsaw under supervision only. The
manufacturer is not liable for damages,
which were caused through use in appli-
cations for which it was not designed, or
incorrect operation.
This electric chainsaw is to be used only
by one person and only for sawing wood.
The chainsaw must be held with the right
hand on the rear handle and the left hand
on the front handle. Before use, the user
must have read and understood all of the
information and directions in the operat-
ing instructions. The user must wear ap-
propriate personal protective equipment
(PPE). The chainsaw is to be used only for
sawing wood. Materials such as plastic,
stone, metal or wood containing foreign
objects (e.g. nails or screws) must not be
machined!

General description

Extent of the delivery

- Chainsaw
- Chain bar (mounted)
- Saw chain (mounted)
- Saw bar protection sheath
- 180 ml Grizzly
The diagrams can be found on
the front old-out pages.

Overview

1 Rear handle
A
2 Oil filler cap
3 Chain brake handle, front hand
guard
4 Chain bar
bio chain oil
5 Saw chain
6 Nose sprocket
7 Bumper
8 Front handle
9 Electric motor
10 On/off switch
11 Safety lock
12 Chain catcher
13 Chain adjustment ring
14 Fastening bolt for sprocket chain
wheel covering
15 Sprocket chain wheel covering
16 Rear hand guard
17 Cable holder
18 Mains cable
19 Saw bar protection sheath
C
20 Oil level control
21 Bar bolt
F
22 Tensioning plate
G
23 Sprocket
24 Tab
J
25 Oil passages

Function description

The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.
GB
51